| |
| Closed Systems |
 |
| GT Viton Closed System for MicroMatic Container with 5'-hose, for measuring in 1/2 G increments [CCS-8605-Micromatic] | $850.00 | [Order Now] |
| GT Viton Closed System for 2.5 G Container with 5'-hose, for measuring 1/2 Gallon increments [CCS-8605-MT] | $675.00 | [Order Now] |
| GT Viton Closed System for 2.5 G Container with 5'-hose, for emptying full 2.5 G Container at one time [CCS-8605-NM] | $425.00 | [Order Now] |
| GT Viton Closed System for 2.5 G Container with 5'-hose, for measuring in 1 oz increments [CCS-8605-MH] | $525.00 | [Order Now] |
| |
| 5 Gallon Tank |
 5-gallon Tank is ideal for use with sanitary chemicals, flavorings/concentrates, edible oils, pharmaceutical preps, ag-chem chemicals, NEC photochemical x-ray & electronic diagnostic substances, petroleum products, misc. food & kindred products, powders. Not for fuels or oils. |
| 5 Gallon Tank [5G-Tank] | $25.00 | [Order Now] |
| |
| Molykote 111 |
 Molykote 111 is the recommended silicon lubricant for use with GoatThroat Pumps. |
| MOLYKOTE 111 (per 6 gram tube) [Molykote-111] | $3.00 | [Order Now] |
| |
| Spout Reducer |
 Spout Reducer allows easy filling of small-necked containers. Graduated sections of PVC tubes from 1/4" to 3/8" can be removed for just the right fit. |
| Spout Reducer [GT-SR] | $22.00 | [Order Now] |
| |
| Replacement O-Ring Sets |
 Replacement O-ring Set includes O-rings for pressure release cap, tap assembly, piston and outlet. |
| #25 O-ring Nitrile 10 pieces for Maintenance Program [O-Ring#25Nitrile] | $25.00 | [Order Now] |
| #25 O-ring Viton 10 pieces for Maintenance Program [O-Ring#25Viton] | $30.00 | [Order Now] |
| #25 O-ring EPDM 10 pieces for Maintenance Program [O-Ring#25EPDM] | $25.00 | [Order Now] |
| Just the Essential Replacements - Viton Orings and Tap Washer [JTEViton] | $44.00 | [Order Now] |
| Just The Essential Replacement - Santoprene Oring and Tap Washer [JTESantoprene] | $35.00 | [Order Now] |
| Just the Essential Replacements - Nitrile Orings and Tap Washer [JTENitrile] | $29.00 | [Order Now] |
| Just The Essential Replacements - EPDM Orings and Tap Washer [JTEEPDM] | $29.00 | [Order Now] |
| |
| Drum Seal Sets Singles |
 Replacement Drum Seals: Single drum seals to fit most common container sizes: small (1.75"), medium (2.0") or large (2.25"). |
| DS 200S Santoprene Drum Seal Small [DS-200S-SS] | $33.00 | [Order Now] |
| DS 200S Santoprene Drum Seal Medium [DS-200S-SM] | $22.00 | [Order Now] |
| DS-200S Santoprene Drum Seal Large [DS-200S-SL] | $33.00 | [Order Now] |
| DS 300 Viton Single Large Drum Seal Singles [DS-300-SVL] | $67.00 | [Order Now] |
| DS 300 Viton Single Medium Drum Seal Singles [DS-300-SVM] | $44.00 | [Order Now] |
| DS 300 Viton Single Small Drum Seal Singles [DS-300-SVS] | $67.00 | [Order Now] |
| DS 200 EPDM Single Large Drum Seal Singles [DS-200-SEL] | $22.00 | [Order Now] |
| DS 200 EPDM Single Medium Drum Seal Singles [DS-200-SEM] | $22.00 | [Order Now] |
| DS 200 EPDM Single Small Drum Seal Singles [DS-200-SES] | $22.00 | [Order Now] |
| DS 100 Nitrile Single Large Drum Seal Singles [DS-100-SL] | $22.00 | [Order Now] |
| DS 100 Nitrile Single Medium Drum Seal Singles [DS-100-SM] | $22.00 | [Order Now] |
| DS 100 Nitrile Single Small Drum Seal Singles [DS-100-SS] | $22.00 | [Order Now] |
| |
| Replacement Parts |
| These replacement parts will help you repair various parts of your GoatThroat Pump. See below for details. |
| Main Piston Assembly Green [MPA-Green] | $25.00 | [Order Now] |
| Main Piston Assembly Red [MPA-Red] | $25.00 | [Order Now] |
| Main Piston Assembly Blue [MPA-Blue] | $25.00 | [Order Now] |
| Replacement Santoprene Tap [RPSantopreneTap] | $64.00 | [Order Now] |
| Replacement EPDM Tap [RPEPDMTap] | $59.00 | [Order Now] |
| Replacement Nitrile Tap [RPNitrileTap] | $59.00 | [Order Now] |
| Replacement Viton Tap [RPVitonTap] | $69.00 | [Order Now] |
| |
| Siphon Tubes and Connectors |
 Siphon Tubes & Connectors: Set includes four 9-inch segments; single tube is 37.4 inches long. Connectors & foot pieces can be ordered separately. |
| Siphon Tube Kit with all connectors [STK] | $35.00 | [Order Now] |
| Tube Foot Piece [STF-01] | $1.55 | [Order Now] |
| Tube Segment Connector [STC] | $1.55 | [Order Now] |
| Single 38" Siphon Tube (1 lb) [ST-01] | $32.00 | [Order Now] |
| Set of 4 9" Siphon Tubes (1 lb) [ST-04] | $25.00 | [Order Now] |
| |
| Tube Cutter |
 Cut polyethylene, nylon, or polypropylene with this razor edged tube cutter. It assures clean and square cuts. It may also be used with vinyl, teflon, polyurethane, rubber, and silicone tubing. |
| Tube Cutter [TubeCutter] | $20.00 | [Order Now] |
| |
| Standoffs |
 Standoffs can be used to raise pump body 3 to 12 inches. Compensates for high drum lip and allows small containers to be placed beneath the tap more easily. Includes extra length of siphon tube and connector. Always match plastic standoffs to plastic drums, and steel standoffs to steel drums. |
| Straight Threaded Standoff with Viton Washer [STV-StraightStandoffVitonWasher] | $45.00 | [Order Now] |
| Straight Threaded Standoff with EPDM Washer - also for Santoprene [STEP-StraightThreadEPDMWasher] | $42.00 | [Order Now] |
| Straight Threaded Standoff with Nitrile Washer [STN-StraightStandoffNitrileWasher] | $42.00 | [Order Now] |
| 4 inch high brass standoff with 2" npt [SO4-Brass] | $50.00 | [Order Now] |
| SO 4 Stainless Steel - 4-inch height Steel (1lb) Standoff [SO-4Steel] | $45.00 | [Order Now] |
| 12" Threaded Standoff kit for NPT Opening [SO-12] | $52.00 | [Order Now] |
| SO 4 - 4-inch height (1 lb) Standoff [SO-4] | $37.00 | [Order Now] |
| |
| Buttress Adapters |
 Buttress Adapters provide an airtight seal on containers with a coarse thread that cannot accommodate standard GoatThroat drum seals. Available in sizes to fit most common drum aperture diameters of 2.25" (Asia), 2.50" (U.S.) and 2.75" (Europe). CLICK PICTURE FOR SIZING CHART |
| 2M BPR: 2.75" Buttress Adapter [2M-BPR-2.75] | $39.00 | [Order Now] |
| 2M BPR: 2.50" Buttress Adapter [2M-BPR-2.50] | $39.00 | [Order Now] |
| 2M BPR: 2.25" Buttress Adapter [2M-BPR-2.25] | $39.00 | [Order Now] |
| |
| Specialty Adapters |
 |
| Permits drawing of fluid from 3/4-inch opening with GT Pump on other side in VITON [QD75V] | $65.00 | [Order Now] |
| Permits drawing of fluid from 3/4-inch opening with GT Pump on other side EPDM [QD75EP] | $60.00 | [Order Now] |
| Adapter for Nalgene bottles with 83B closure. Please specify pump to receive correct washer [5G-N83B-GT] | $100.00 | [Order Now] |
| 5 Gallon Metal Container Adapter with External thread. Please specify pump type for correct washer. [5G-MCA-GT] | $60.00 | [Order Now] |
| RIEKE FS II - NEW MODEL ADAPTER For Grey Cap [RiekeFSIIAdapterforGREYCAP] | $55.00 | [Order Now] |
| Viton #230 Replacement O-Ring for Reike Fitting [230VitonOring] | $6.00 | [Order Now] |
| EPDM-Santoprene #230 Replacement O-Ring for Reike Fitting [230EPDM] | $5.00 | [Order Now] |
| Nitrile Replacement #230 O-Ring for Reike Fitting [230NitrileOring] | $5.00 | [Order Now] |
| Adapter for high pressure or installation of pump on moving vehicles [HPA-GT-2inNPT] | $50.00 | [Order Now] |
| Adapter for Eternal Thread on 5-7 gallon Rieke 70mm opening container [5G-70MM-GT] | $49.00 | [Order Now] |
| Adapter for Rieke Flex Spout - OLD VERSION - for Black Cap [AdapterRPSforBlackCap] | $54.00 | [Order Now] |
| |
| GoatThroat for Gasoline |
 Recently introduced into the aviation market, GoatThroat Pumps deliver fuel efficiently and directly to the filler downspout using a remote discharge nozzle attached to pump. |
| Specialty Application Viton Pump with Nitrile Drum Seal [GT300/100Pump] | $205.00 | [Order Now] |
| GoatThroat for Gas with No Hose [GTforGAS] | $190.00 | [Order Now] |
| GoatThroat For Gasoline with 10' Hose [GT/RT/100/30010H] | $225.00 | [Order Now] |
| 20 Gallon Steel Drum. Ideal for user who wants to visit the gas station less often. Please ground this item with grounding wires before dispensing. [20GalSteelDrum] | $75.00 | [Order Now] |
| DISCONTINUED [WedcoAdapter] | $0.00 | [Order Now] |
| Scepter Adapter for Scepter Gas Can [ScepterAdapter] | $46.00 | [Order Now] |
| Blitz 5 Gallon Gas Can [BlitzCan] | $20.00 | [Order Now] |
| 5 Gallon Gal Can Adapter for Blitz Gas Can [BlitzAdapter] | $49.00 | [Order Now] |
| GoatThroat for Gasoline with 5'Hose [GT/RT/100/3005H] | $210.00 | [Order Now] |
| |
| BillyGoat Adapter for Shop Air |
 BillyGoat adapter for compressors and Shop Air GoatThroat pumps can now safely be used with shop air, air compressors or bottled compressed air in the shop, or in the field. |
| ReplacementMini Air Filter for Pneumatic Operation cleans the air of contaminants and humidity [226-225ReplacmentFilter] | $16.00 | [Order Now] |
| Mini Air Filter for Pneumatic Operation cleans the air of contaminants and humidity [226-125AirFilter] | $37.00 | [Order Now] |
| Anti- Tamper Governor Kit prevents overpressurization of drums [AntiTamperKit] | $10.00 | [Order Now] |
| BGA BillyGoat Adapter for Shop Air [BGA] | $165.00 | [Order Now] |
| |
| GT MultiPump Dispensing System |
 This award winning system allows simultaneous dispensing fluids from multiple containers with only 2psi from your plant air system or compressor. |
| Extender Manifold for up to 5 Additional Pumps [BGA-MSE-04] | $149.00 | [Order Now] |
| Insert System for Existing BGA for MulitPump System [BGA-MSI-03] | $199.00 | [Order Now] |
| Pump Adapter for GT Multi-Pump Adapter - 1 per pump required [BGA-MSPA-02] | $59.00 | [Order Now] |
| GT MultiPump Manifold for 4 Pumps [BGAMSC01] | $249.00 | [Order Now] |
| |
| Seamless Tubing |
 Seamless 40-inch tube: Recommended for oily or very viscous fluids, to prevent leaking at tube joints and assure a smooth, uncontaminated flow. |
| 38-inch Seamless Tube [38-SST] | $32.00 | [Order Now] |
| |
| Extension Hoses |
 Extension Hoses (5' minimum order): Tygon 2075 hose is available for special applications. Tygon 200S, FEP-lined hose, is available for very aggressive fluid applications. Tygon 4040 is available for fuel applications. |
| Adapts Pump fluid outlet for use with 1/2 inch thread on hose [GT-Barb-Pipe-Adapter] | $30.00 | [Order Now] |
| Tygon 4040 Hose (per foot) [Tygon-4040] | $6.50 | [Order Now] |
| Tygon 200SE - Teflon Lined Tubing [Tygon-200SE] | $13.00 | [Order Now] |
| 5-foot Extension Hose (2 lb) [Hose-05] | $24.00 | [Order Now] |
| Tygon 2075 Hose (per foot) [Tygon-2075] | $8.00 | [Order Now] |
| 10-foot Extension Hose (4 lb) [Hose-10] | $32.00 | [Order Now] |
| 15-foot Extension Hose (6 lb) [Hose-15] | $42.00 | [Order Now] |
| |
| Remote Tap with Extension Hose |
 Remote Tap with 5' or 10' hose: Polypropylene body barb hose connector replaces tap for permanent attachment directly to pump body. Hose is PVC. Please make sure PVC is compatible with the fluid you are pumping. Other hose types are below. Call for compatibility information 866.NewGoat (639-4628) |
| Viton Remote Discharge Tap with 10-foot Hose [RT/10/300] | $125.00 | [Order Now] |
| Santoprene Remote DischanrgeTap with 10-foot Hose [RT/10/200S] | $106.00 | [Order Now] |
| EPDM Remote Discharge Tap with 10-foot Hose [RT/10/200] | $95.00 | [Order Now] |
| Nitrile Remote Discharge Tap with 10-foot Hose [RT/10/100] | $95.00 | [Order Now] |
| Viton Remote Discharge Tap with 5-foot Hose [RT/5/300] | $120.00 | [Order Now] |
| Santoprene Remote Discharge Tap with 5-foot Hose [RT/5/200S] | $96.00 | [Order Now] |
| EPDM Remote Discharge Tap with 5-foot Hose [RT/5/200] | $88.00 | [Order Now] |
| Nitrile Remote Discharge Tap with 5-foot Hose [RT/5/100] | $88.00 | [Order Now] |
| |
| SCP-6500 Static Conductive Pumps |
 Static Conductive Pumps for Class 1 and 2 Flammable liquids, available March 1, 2010. Place your order early, INCLUDES 1 pump, siphon tube set for up to 39 inches, 2-inch pipe thread fitting, 3 gram packet of molykote 111 grease, 6-foot grounding cable with aligator clip and single medium drum seal. CLICK PICTURE FOR MORE INFORMATION |
| Static Conductive Pump with Attached Remote Tap in Santoprene - Hose is extra [SCP-6500-RT-6500Santoprene] | $326.00 | [Order Now] |
| Nitrile Remote Tap for SCP-6500 ground wire included, hose extra [SCP-6500-RT100] | $65.00 | [Order Now] |
| Static Conductive Pump with Attached Remote Tap in EPDM - Hose is extra [SCP-6500-RT-6500EPDM] | $324.00 | [Order Now] |
| Short jumper cable and tube connector for 12-inch standoff setup [SCP-Jumper] | $10.00 | [Order Now] |
| Extra Single Siphon Tube to extend reach of fluid out flow or to use with 12-inch standoff [SPC-SST-38] | $50.00 | [Order Now] |
| Static Conductive Pump with Attached Remote Tap in Viton - Hose is extra [SCP-6500-RT-6500Viton] | $383.00 | [Order Now] |
| GoatThroat 300 Pump with Static Conductive Plastic and Viton Seals, included 6 foot grounding wire [SCP6500.300.Viton] | $339.00 | [Order Now] |
| GoatThroat 200S Pump with Static Conductive Plastic and Santoprene Seals, included 6 foot grounding wire [SCP6500.200S.Santoprene] | $290.00 | [Order Now] |
| GoatThroat 200 Pump with Static Conductive Plastic and EPDM Seals, included 6 foot grounding wire [SCP6500.200.EPDM] | $280.00 | [Order Now] |
| GoatThroat 100 Pump with Static Conductive Plastic and Nitrile Seals included 6 foot grounding wire [SCP6500.100.Nitrile] | $275.00 | [Order Now] |
| |
| Solvent Vapor Degreaser Pumps |
 Applications ranges: Chlorinated Solvents and Fluorinated Solvents such as Novec HFE and Azeotropes |
| EPDM Vapor Degreaser Pump with EPDM Seals and 5-foot FEP lined Hose [VSP-EP-8605] | $446.00 | [Order Now] |
| Vapor Degreaser Pump with 10 feet of FEP lined hose [SVP-6810] | $546.00 | [Order Now] |
| Vapor Degreaser Pump with 5' FEP lined hose [VSP-6805] | $496.00 | [Order Now] |
| |
| GoatThroat Pumps with 4" Standoff - please specify Steel or Plastic Drum |
| FOR MAXIMUM FLEXIBILITY: GoatThroat pumps with 4" Standoff. INCLUDES 1 pump, siphon tube set for up to 42 inches, 2-inch pipe thread fitting, 3 gram packet of molykote 111 grease and single medium drum seal. Note: single drum seal is standard; multi-size drum seal kit optional |
| GoatThroat 300 Pump with Single Medium Drum Seal and 4" Drum Standoff [GT300Single] | $292.25 | [Order Now] |
| GoatThroat Pump with Single Medium Santoprene Seal and 4" Plastic Standoff Kit [GT200S/ST/Steel] | $237.25 | [Order Now] |
| GoatThroat Pump with Single Medium EPDM Seal and 4" Plastic Standoff Kit [GT200/ST/Steel] | $224.75 | [Order Now] |
| GoatThroat Pump with Single Medium Viton Seal and 4" Steel Standoff [GT300/ST/Steel] | $292.25 | [Order Now] |
| GoatThroat Pump with Single Medium Nitrile Seal and 4" Plastic Standoff Kit [GT100/Standoff/Steel] | $218.50 | [Order Now] |
| GoatThroat Pump with Single Medium Santoprene Seal and 4" Plastic Standoff Kit [GT200S/ST/Plastic] | $237.25 | [Order Now] |
| GoatThroat Pump with Single Medium EPDM Seal and 4" Plastic Standoff Kit [GT200/ST/Plastic] | $224.75 | [Order Now] |
| GoatThroat Pump with Single Medium Nitrile Seal and 4" Plastic Standoff Kit [GT100/ST/Plastic] | $218.50 | [Order Now] |
| |
| GoatThroat Pumps with No Silicone Grease for High Purity |
| Additional charge to manufacture pump with no silicone grease. |
| No Silicone Grease in Manufacture [ChargeForNoSilicone] | $50.00 | [Order Now] |
| |
| Compatibility Test Kits |
| If your fluid is not on our list, this 2 week soak test will help determine which of our pumps will work with your fluid. The fee is refundable when you send us the results of the test. |
| Test for extractables in Santoprene Pump. Cost applied to your order when test results given to us [HPETestKit-Santoprene] | $20.00 | [Order Now] |
| Test for extractables in Nitrile Pumps. Cost applied to your order when test results given to us [HPETestKit-Nitrile] | $20.00 | [Order Now] |
| Test for extractables in EPDM Pump. Cost applied to your order when test results given to us [HPETestKit-EPDM] | $20.00 | [Order Now] |
| Test for extractables in Viton Pump. Cost applied to your order when test results given to us [HPETestKit-Viton] | $20.00 | [Order Now] |
| Test for compatibility if no information exists in Database. Cost applied to your order when test results given to us [CompatibilityTestKit] | $20.00 | [Order Now] |
| |
| Before Ordering GoatThroat Pumps, please review. |
 (click here) Please complete this document prior to ordering to help you in the selection process. Please answer all questions so that you get the correct pump, adapters for your container as well as any accessories.
If you like, fill out the questionnaire and fax to 212.243.6070 and we will send you back a recommendation.
Or give us a call and we will walk you through the form. 866-New-Goat (866-639-4628).
For more information on the chemical compatibility of our pumps with your fluids, please consult the
GT-100 Compatibility Guide, GT-200 Compatibility Guide, GT-300 Compatibility Guide.
|
| See Below For Specific Ordering Information [GeneralInformation] | $0.00 | [Order Now] |
| |
| GoatThroat Apparel |
 A MUST HAVE: All cotton, red trim, one size |
| GoatThroat Hat [GT_Hat] | $15.00 | [Order Now] |
