goat throat for food and beverage

Food Grade Pumps

GoatThroat Pumps for Food Manufacturing

It’s impossible to run a production facility properly without pumps that contribute to a hygienic, safe and efficient environment. Finding food & beverage drum pumps that reduce spills and make it easier to transfer liquid content between containers is essential for an orderly operation and spill-free environment. GoatThroat pumps are used in the food and beverage industry to reduce product waste and create neat, balanced pours when transferring liquids from storage containers to point of use.  These food-grade pumps can help facilities to meet compliance for OSHA, CFR Title 21, parts 170 – 199, and other regulating bodies.  They will also improve your ability to meet HACCP requirements. They are capable of handling oils, soy, vinegar, various flavorings, cleaning fluids, water, and chemicals.

Our closed system food-grade pumps are optimal for keeping products protected from foreign elements and contamination. They are produced with FDA-approved and compliant plastics. This makes GoatThroat’s sanitary drum pumps and food-grade hand pumps an excellent tool for food and beverage production factories.

As a member of the food and beverage industry, the health and cleanliness of production are critical to success. The devastation caused by public reactions to production mishaps or disasters is difficult to overcome. Food and beverage companies are more subject to public opinion than most other industries. For that reason, the food and beverage industry goes out of its way to ensure a safe, clean, and effective production process.

GoatThroat can provide the food-grade barrel pumps, food-grade drum pumps, and other beverage pumps that your factory needs to handle your liquid product in a clean and health-conscious manner. Our pumps are designed to reduce the risk of spills or leaks. That means not only are GoatThroat products FDA-approved and ready to be attached to a 55-gallon drum as food-grade pumps, but they also prevent product loss on the factory floor. Less product lost to spills and leaks means more food or beverage product will reach the final stage and be shipped for consumption or use. In short, less waste equals more output. Thus, your company will perform better.

Food and beverage industry liquids that GoatThroat liquid food transfer pumps and chemical resistant closed system pumps are excellent for:

  • Cleaning Solutions
  • Sanitizers
  • Chlorine Based Chemicals
  • Liquid Enzymes
  • Potassium Hydroxide
  • Hydrogen Peroxide
  • Food Acids
  • Vinegar
  • Honey
  • Olive Oil
  • Wine
  • Glycerine
  • Coconut Oil
  • Water
  • Milk
  • Soft Drinks
  • Juice
  • Most liquids

GoatThroat pumps are a versatile solution for food and beverage production. Dairy farms and factories, breweries, wineries, juice processing plants, and soft drink manufacturers can all find an excellent use for our quality hand drum pumps. Other manufacturing facility types that can make efficient use of our reliable and food-grade pumps are fish processors, abbatoirs, and bakeries. Any company in need of transferring large quantities of food-grade liquids will find GoatThroat pumps can do the job.

With experience in producing quality pumps for corrosive and hazardous materials, GoatThroat has mastered the engineering needed to create food-grade closed systems perfect for long-term use on food and beverage production factory floors. The extra durability of GoatThroat pumps isn’t just a product lifetime benefit. It also allows harsher liquid materials to be passed through our pumps, which is perfect for bakeries and large baked goods production facilities.

Regardless of the food or beverage your company is producing, GoatThroat can provide the food-grade liquid transfer pumps to handle your production needs.

Food & Beverage Pump Applications

  • Keep toxic cleaning chemicals and hazardous materials sealed and separate from material product
  • Manually transfer food-grade product to and from storage drums
  • Use controlled rate of flow and mixing for quick and effective food or beverage prototyping
  • Maintain liquid content integrity during food preparation and content dispersal

CIP Transfer Pumps

The need for hand drum pumps and food-grade transfer methods for liquid materials used in food and beverage production is a given for the industry. The chemicals required for facility maintenance and the added responsibility of food-grade material production demand heavy use of transfer pumps, mixing methods, storage access, and manual controls. GoatThroat pumps are here to meet your demand for food-grade solutions.

A GoatThroat pump makes an ideal clean-in-place (CIP) pump because it is easy to use and maintain in a production environment. GoatThroat pumps also have a high life expectancy when compared to standard drum pumps on the market today. Many enterprises use GoatThroat pumps for direct contact with food-grade raw materials because they are safe and meet the proper requirements. In addition, these CIP pumps provide ideal performance for handling sanitizing and disinfection liquids.

Our pumps will make use of every drop of liquid material and transfer from container to container or point of use can be done in a closed system. This means that liquid products can avoid both foreign contamination and accidental spills. The results in less accrued waste product and more finished product ready to ship out. GoatThroat pumps are also durable during long-term use. You’ll save money on waste disposal, gain money on increased product sales, and cut the costs of replacing lesser quality pumps that quickly break over minimal wear and tear.

The practical applications for our quality food-grade drum pumps for the massive quantities of liquid food product that is handled and created by food and beverage producers are spread throughout the food and beverage production processes. Get in contact with a professional from GoatThroat to acquire the food-grade pumps you need to stay ahead of the competition.

Download Library.

Click on a title to download.

Recommended Products

Drum Pumps for Safe Chemical Transfer

When you purchase a GoatThroat pump, you can say goodbye to dangerous, messy chemical spills. Say goodbye to wasting valuable liquid product as a result of sloppy, inefficient pouring methods. Industry-trusted GoatThroat Pumps offer the easiest and safest way to transfer and dispense liquids. Our hand pump products and hazardous material pump products can be used for both corrosive and flammable liquids. Our trusted, recognized pump products are ideal for any environment where chemicals and potentially hazardous materials are used like laboratories or manufacturing. GoatThroat Pumps work well because they have a no-nonsense design that makes dispensing liquids from giant containers as easy as turning on a faucet with one touch. We’ve designed our pumps to handle anything from a two-gallon jug to a 55-gallon drum. We’ll even work with you to help select the best of our products to create a solution that works for your specific chemical usage. GoatThroat Pumps work by pressurizing a container to dispense liquids. Our one-touch flow control dispenses liquids at a controlled rate to prevent waste, conserve inventory, and produce precisely measured amounts every time. Flow can be continuous, or adjusted to dispense liquids at rates up to 4.5 gallons per minute depending on viscosity. Here’s a look at some of the perks of choosing GoatThroat when looking around for hand pump manufacturers:

  • The ability to dispense liquids at a controlled rate.
  • Waste prevention.
  • Inventory conservation.
  • Adjustable flow rates of up to 4.5 gallons per minute.
  • OSHA and EPA compliance.

GoatThroat Pumps deliver the safest, most reliable, and easiest way to transfer liquids between containers with accuracy and precision. Is it time to walk away from the perilous tip-and-pour method that far too many warehouses and laboratory environments are using? Learn more about GoatThroat Pumps today!

Case Studies.

Diverse Food Markets Demand Diverse Technical Solutions

Innovative Transfer Pump is a New Ingredient in an Old Family Recipe While major manufacturers measure line production in thousands of gallons per hour, food processing entrepreneurs may only need a few gallons of a given ingredient every 60 minutes. Nonetheless, reliable pumping is a prerequisite, and corrosion and abrasion-resistant pump components can contribute to product quality as their business builds. Stancatos’s restaurant exemplifies the entrepreneurial category. A Cleveland area mainstay since 1938, Stancato’s began bottling its spaghetti sauce and Italian salad dressing for diners who wanted to enjoy the toppings at home. Last year, the firm branched out into the retail distribution and acquired a former canning in Canton, OH to meet growing demand. “We were pouring ingredients into a bucket from a 55-gallon drum weighing about 400 lbs.,” recalls Scott Six, the plant’s production manager. “It was a two-man job, inconvenient, and hard work.” Like many manufacturers before …

Keep Reading Below

Earth Supplied Products – Pumping Beauty

Cosmetics Manufacturer Improves Processes Thanks to GoatThroat Pumps For the passed fifteen years, Florida-based Earth Supplied Products has its hand in the beauty formulas of a wide variety of cosmetics giants like Estee Lauder, Avon and Revlon just to name a few. Catering primarily to companies based on the East Coast, Earth Supplied Products specializes in providing natural, hand-mixed cosmetic additives and ingredients to the personal care and cosmetic industries. Earth Supplied Products uses oils from natural sources like Black Walnuts, Brazil Nuts, Cotton Seeds, Pecans and even Pumpkins. These oils, purchased in 55-gallon drums, are normally dispensed from a traditional spigot style tap. The problem for company owner Peter Boncelet was the process of tapping them, which required each cumbersome 500-pound, 55-gallon drum to first be tipped onto its side. The act of tipping the large heavy cylinders was complicated and potentially dangerous. In addition, having the drums lying …

Keep Reading Below

Diverse Food Markets Demand Diverse Technical Solutions

Innovative Transfer Pump is a New Ingredient in an Old Family Recipe

While major manufacturers measure line production in thousands of gallons per hour, food processing entrepreneurs may only need a few gallons of a given ingredient every 60 minutes. Nonetheless, reliable pumping is a prerequisite, and corrosion and abrasion-resistant pump components can contribute to product quality as their business builds.

Stancatos’s restaurant exemplifies the entrepreneurial category. A Cleveland area mainstay since 1938, Stancato’s began bottling its spaghetti sauce and Italian salad dressing for diners who wanted to enjoy the toppings at home. Last year, the firm branched out into the retail distribution and acquired a former canning in Canton, OH to meet growing demand. “We were pouring ingredients into a bucket from a 55-gallon drum weighing about 400 lbs.,” recalls Scott Six, the plant’s production manager. “It was a two-man job, inconvenient, and hard work.” Like many manufacturers before him Mr. Six concluded a pump was the solution; the only question was, what level of complexity?

An air pressurized pump powered by a shop-air compressor and equipped with a release valve to maintain drum pressure between 2 and 7 psig was the answer. “There’s no pulsing, and at four gallons a minute, it is plenty of volume for our purposes,” reports Six. Olive oil and red-wine vinegar are among the ingredients being transferred.

“I describe it as a beer tap for chemicals, ” says Nancy Westcott, president of New York based GoatThroat Pumps. – a description that makes her investors cringe but which quickly explains the spring actuated pump’s concept. Westcott purchased the molds and manufacturing rights to the 2-lb. pump from a defunct South African firm, renamed it the GoatThroat and partnered with three co-manufacturers to fabricate four food grade versions Stancatos’s is the first US food client, though Australia’s Yalumba Winery and other overseas companies have used the self-priming pump since their introduction in 1997.

Easy cleanability and replaceable o-ring make the units a good fit for good plants, though Westcott say any manufacturer dealing with drum transfer can use them. And material construction makes them appropriate in any application where chemical degradation is a concern.

GoatThroat Pumps have been widely used in a broad range of manufacturing and laboratory applications, as well as in food production in several overseas locations, including Australia’s Yalumba Winery. Stancato’s use of GoatThroat™ products marks the first time the pumps have been used in US food manufacturing.

Made of chemical grade polypropylene, all components of GoatThroat™ Pumps meet U.S. FDA requirements under CFR Title 21, sections 170-199. The pumps can be used to dispense over 1800 different fluids in any industry application that requires easy, safe and cost-effective fluid transfer/decanting. With a unique range of adapters for just about any opening, GoatThroat™ Pumps can pressurize any container from 5 to 55-gallons in seconds. And with an optional remote tap system, a pump can easily deliver fluids in a controlled manner at up to a distance of ten feet from the drum.

Earth Supplied Products – Pumping Beauty

Cosmetics Manufacturer Improves Processes Thanks to GoatThroat Pumps

For the passed fifteen years, Florida-based Earth Supplied Products has its hand in the beauty formulas of a wide variety of cosmetics giants like Estee Lauder, Avon and Revlon just to name a few. Catering primarily to companies based on the East Coast, Earth Supplied Products specializes in providing natural, hand-mixed cosmetic additives and ingredients to the personal care and cosmetic industries. Earth Supplied Products uses oils from natural sources like Black Walnuts, Brazil Nuts, Cotton Seeds, Pecans and even Pumpkins.

These oils, purchased in 55-gallon drums, are normally dispensed from a traditional spigot style tap. The problem for company owner Peter Boncelet was the process of tapping them, which required each cumbersome 500-pound, 55-gallon drum to first be tipped onto its side. The act of tipping the large heavy cylinders was complicated and potentially dangerous. In addition, having the drums lying down on their sides took up a considerable amount of space.

Wanting to improve worker safety, Boncelet conducted an Internet search that lead to his discovery of GoatThroat™ Pumps. He purchased one. Living up to its claim, the pump worked perfectly when inserted atop the upright drum. In addition to eliminating the tipping problem, the pump performed excellently at volumes up to four gallons per minute, with oils of all types and weights. Because it pressurized the drums, the pump made drawing fluid and emptying drums much easier than with the gravity-fed spigot. Providing improved volume control and increased accuracy, the pump eliminated waste and reduced costs. “The pumps have turned out to be a safe and smart solution for us”, says Boncelet.

“Not only are they more convenient, they are really cost effective. They have a life expectancy of 10 to 15 years. They eliminate the potential safety risk. And they can be easily cleaned, sanitized and re-used.” GoatThroat Pumps are made of chemical grade polypropylene, and all components meet U.S. FDA requirements under CFR Title 21, sections 170-199. The pumps can be used to dispense over 700 different fluids in any industry application that requires easy, safe and cost effective fluid transfer/decanting. With a unique range of adapters for just about any opening, GoattThroa Pumps can pressurize any container from 5 to 55-gallons in seconds. And with an optional remote tap system, a pump can easily deliver fluids up to a distance of ten feet from the drum.