Tygon 200SE PTFE Lined Hose – 5 foot section

$76.00

Description

Tygon-200SE-teflon-lined-tubing-sold-in-5-ft-increments.

Please purchase Spring Guard Support separately to support this lined hose which kinks easily.

Hosing Guide

Tubing is available for your remote discharge nozzle or other applications. Please check compatibility with your liquid by reviewing the PVC Tubing Compatiblity Guide and the TYGON Tubing Compatiblity Guide.  We offer Tygon Chemical Resistant 2375 tubing, Tygon 200SE which is lined with FEP, and Tygon 4040 which is gas and oil hose.  All hoses are 1/2-inch ID.

Remote Discharge Taps & Hoses

A remote discharge tap can greatly extend the versatility of GoatThroat pumps. Ideal for transfer of liquids and chemicals from large drums, the remote nozzle allows precise, one-hand flow control, leaving the other hand free for work.

The thumb-operated tap dispenses liquids as easily as using a faucet. Pressurized liquids can be easily transferred to levels up to 6 feet higher than the container, which is impossible with traditional gravity-fed liquid transfer methods. And our patented drip-proof design helps keep work areas clean and prevent potentially hazardous spills.

Remote discharge taps are available singly, or with several hose options. RT100W/H5 comes fitted with a 5-foot PVC hose for permanent connection to the pump body. RT100W/H10 includes a 10-foot hose. All hoses are PVC. RT 100/200/300 and body barb fitting are made of polypropylene.

All hoses are 1/2-inch ID.  Tygon 2075/2375 hose is available for special applications. Tygon 200S, FEP-lined hose, is available for very aggressive fluid applications. Tygon 4040 is available for fuel applications.

Pumps for Flammable Liquids

nfpa Special Features: The SCP line of  Pumps allow class 1 and 2 flammable liquids to be pumped using GoatThroat® Pumps’ unique engineering control technology. The pumps meet the new NFPA30-2015 standards.

Applications ranges:  Alcohols, flammable solvents, volatile hydrocarbons.

SCP-6500 Pumps are engineering controls for fluids which are designed to minimize the hazards associated when transferring  flammable and combustible liquids.  Featuring a grounding wire and a bonding wire and made with conductive plastic  so there is grounding of the liquid, the pump, and, with correct bonding, to the container. Created for most demanding safety programs, these pumps meet NFPA 77 which requires that the path to ground must prevent the accumulation of static electricity in conductive equipment.  The SCP-6500 pumps feature the same breakthrough technology which has made GoatThroat® the most trusted name in transfer pumps.

Made in the USA, these pumps meet  Directive 99/92/EC (also known as ‘ATEX
137’ or the ‘ATEX Workplace Directive’), Directive 94/9/EC (also known as ‘ATEX 95’ or ‘the ATEX Equipment Directive’ and also meet Great Britain’s Dangerous Substances and Explosive Atmospheres Regulations 2002 (DSEAR), The SCP pumps are not subject to the Pressure Equipment Directive(97/23/EC) since the design pressure is identified below the applicability limits for the PED (97/23/ EC) of 0.5bar.

Important Documentation